What you need to flash You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other images like *.img files. Don't try it - it won't work.
You need either a DHCP server, a configured bootloader or a serial cable and a terminal program like HyperTerm. Naruto kecil episode 14 subtitle indonesia it. You need a browser, and a network cable. If you connect the Dreambox directly to the PC, you need a cross cable, if you connect trough a switch/hub/router you need a normal (non-cross) cable. To flash a new image, you can use the second stage loader. It must be present and not broken. The following steps assume you have a DHCP server. - Power down the Dreambox, either using 'shutdown' (to enter the deep-standby mode) or by using the power-switch.
Standby is not enough! Press and hold the button (1) on the frontpanel. Switch on the dreambox, either by using the powerswitch or, in deep-standby mode, press the power button (4). Still, hold the button (1). A text '*** STOP ***' (3) should appear. Torrent cadpower 2010 crack download.
If something like '/flash'. Appears, you didn't hold the right button. Now you can release the button. The bootloader entered the 'waiting' mode. Above the '*** STOP ***' text, there should appear an IP-address (2) (four decimal values with a dot in between). If there appears the string 'dhcp' instead, the box still searches for a DHCP server. Wait a bit.
Dreambox Forum; Flash Wizard 6.3 Final Deutsch updated. Make sure before installing FlashWizard on your 7020 to have an OE image in flash. Just make sure to have a compatible image in flash when you install a new one. In example, to install a new LZMA compressed image, you must have a LZMA image in flash too.
If it doesn't change, something doesn't work with the DHCP server. Check wether network cable is plugged in etc. - Now, open a browser on your PC. (1.) enter in the address line '(where ip must be replaced with the value in the LCD). (2.) on the bottom of the page, there's a link called 'firmware upgrade'.
- On the next page, you can select the flash image you want to flash. Be sure that it has the '.nfi' extension. You can't flash other images (like.img)! - Click on 'FLASH!'
It might take some time to upload and flash the image. - Switch the box off again, and on again. The new image should be flashed and working.